Mirion Technologies DMC 3000 - Alarms

-21-
151153EN-G
DMC 3000 User's Guide
5- Alarms
The DMC 3000 dosimeter provides multiple methods to alert the wearer of alarming conditions:
 A loud audible alarm is emitted by the dosimeter speaker
 A message or symbol “Alarm Type” appears on the high-contrast LCD display with backlight ON during
3seconds
 Very bright red ashes from the front red ashing LED
 Red ashes from the top red LED
 Vibrations
Note:
- In case of simultaneous alarms, corresponding messages and symbols are displayed based on priority level.
- Speaker, vibrator, blacklight, front red ashing LED and top red LED can be disabled when conguring the DMC 3000.
This function can be modied using the DMCUser maintenance software in G3 protocol only.
Look at the pictogram on the top right corner of the display to know which alarm is disabled.
Note:
Alarm type displayed is independent of the measurement
displayed (for exemple, alarm type can be “RATE ALARM”
when Dose value is displayed).