Mirion Technologies DMC 3000 - Page 7

-7-
151153EN-G
DMC 3000 User's Guide
General
V7 firmware version:
 V 7.2.1: G3-only protocol; compatible with neutron Hp(10) and beta Hp(0,07) modules.
 V 7.4.4: Added dose display resolution of 0.1 µSv, added prealarm latched until acknowledgement.
 Future release: Added PRD module support.
The DMC 3000 must be calibrated for Hp(0,07) gamma at the factory prior to initial use with the Hp(0,07) Module.
Check the verication certicate to see the calibration in Hp(0,07) of your DMC 3000.
Please contact Mirion Technologies for compatibility diagnostic and information.
If the rmware version is not viewable by pressing “+” key, use DMCUser software.