Mirion Technologies RDS-31 S - Show and Change Dose Rate Alarm Level (FX.RAL;SQ.RAL)

14

To change the chirp state:
 While the current chirp state is displayed, press [

]shortly
and the display shows the state of the related Chirp
function blinking
 Scroll with short [Ξ] until the desired value (CA:OFF|
CA:ON; CV:OFF| CV:ON; CH:/1|…CH:/50) is given
 Press an intermediate [

] (Short [

] takes back to the
menu).
 The Chirp state is now set.
DivisorSubmenu
...
↓ ↑
CH:
/50
↓ ↑
/1
↓ ↑
/2→
ChooseOption
↓ ↑
/5
↓ ↑
/10
↓ ↑
/20
↓ ↑
...
The display provides the new setting without blinking and if no
button action takes place within the time-out period, the display
returns to the dose rate.

5.4.4 Show and Change Dose Rate Alarm Level
(FX.RAL/SQ.RAL)
The dose rate alarm of RDS-31 can operate in two different
modes:
 Fixed dose rate alarm level
 Sequential dose rate alarm
AudioSubmenu VisualSubmenu
CA:
...
CV:
...
↓ ↑ ↓ ↑
ON→
ChooseOption
OFF→
ChooseOption
↓ ↑ ↓ ↑
OFF ON
↓ ↓
... ...