Mirion Technologies RDS-31 S - Show and Change Dose Alarm Level (FX.DAL;SQ.DAL); Fixed Dose Alarm Level

19

5.4.6 Show and Change Dose Alarm Level
(FX.DAL/SQ.DAL)
The dose alarm of the instrument can operate in two different
modes:
 Fixed dose alarm level
 Sequential dose alarm
NOTE: The mode can be selected only by using the CSW-31
software.
5.4.6.1 Fixed Dose Alarm Level:

There are 8 different levels for dose alarm:
 Disabled, 100, 500, 1000, 5000, 10
000, 50 000, 100 000 or 500 000 µSv or mrem.
The user may select any one of these to be the active alarm
threshold level.
Note: All these dose alarm threshold levels can be changed and stored into
the instrument’s internal memory with the CSW-31 software.
To see the current dose alarm threshold level:
 Activate the menu (Short [Ξ]) and scroll (Short [Ξ]’s) until
display changes to FX.DAL
XT.CRASUB‐menu
...
↓  ↑ 
XT.CRA 
OFF
↓  ↑ 
10cps
↓  ↑ 
15cps
→
Choose
Option
↓  ↑ 
20cps
↓  ↑ 
60cps
↓  ↑ 
100cps
600cps
1000cps
6000cps
Allnumericalvaluesofthelistcanbechanged
usingtheCSW‐31software.
↓  ↑ 
... 