To Next PageTo Next Page
Need help?Do you have a question about the MiTAC 7521 PLUS/N and is the answer not in the manual?
Describes the engineering specifications for the portable notebook computer system.
Details the components and architecture of the notebook's hardware system.
Lists the individual hardware components used in the system.
Describes the specifications for the Intel Pentium III/Celeron FC-PGA processors.
Details the ICS9248-102 system frequency synthesizer.
Explains the features of the SiS630S single chipset solution.
Details the functionality of the NS PC 97338VJG Super IO controller.
Describes the TI1225 PC Card interface controller and its features.
Details the TPS2206 dual-slot PC card power interface switch.
Explains the H8 (3434F) universal keyboard controller.
Overview of the system BIOS and its software features.
Lists key features including System BIOS, VGA BIOS, POST, APM, PnP, ACPI and PXE BIOS.
Explains how to use the BIOS setup utility for system configuration.
Details the ACPI power management features and states.
Describes the HYUNDAI SDRAM cell and memory system characteristics.
Lists the available ports and connectors on the system.
Details the AC'97 CODEC CS4299 audio solution.
Explains the features of the HSDL-3600#007 Infrared module.
Details the SiS900 Fast Ethernet LAN controller features.
Explains the CH7005C digital PC to TV encoder for video output.
Lists the functions associated with hot key combinations.
Describes the functionality of the Easy Start buttons.
Information on the state-of-the-art Flash EEPROM technology.
Explains the status LED indicators for system activity.
Specifies the assignments for COM1 and COM2 ports.
Details power saving modes configurable via ROM CMOS setup.
Provides specifications for the Hyundai 14X13 XGA TFT LCD Panel.
Details the Fujitsu MHK2120AT 12 GB Hard Disk Drive specifications.
Lists specifications for the Mitsumi D353G Floppy Disk Drive.
Information about external and internal keyboard support.
Details the optional Matsushita, LGS, or Teac CD-ROM drives.
Describes the function of various status LEDs on the system.
Lists the I/O ports available on the system.
Information about the CMOS battery specifications and life.
Details the specifications and operating conditions of the PCMCIA socket.
Specifications for the system fan, including dimensions and operating speed.
Defines the General Purpose Input/Output (GPIO) signals and their functions.
Lists the necessary tools for system assembly and disassembly.
Provides visual layouts of the system's front, left, right, rear, bottom, and top views.
Identifies components visible from the front of the notebook.
Identifies components visible on the left side of the notebook.
Identifies components visible on the right side of the notebook.
Identifies components visible on the rear of the notebook.
Identifies components visible on the bottom of the notebook.
Identifies components visible when the notebook is open.
Guides on how to disassemble major notebook components.
Step-by-step instructions for removing and reinstalling the battery pack.
Instructions for disassembling and reassembling the CPU module.
Steps for removing and reinstalling the modem card.
Instructions for disassembling and reassembling the FDD/HDD module.
Steps for removing and reinstalling the CD-ROM drive.
Instructions for removing and reinstalling the keyboard.
Steps for removing and reinstalling the SO-DIMM memory module.
Instructions for disassembling and reassembling the LCD assembly.
Steps for removing and reinstalling the LCD panel.
Instructions for removing and reinstalling the inverter board.
Steps for disassembling and reassembling the system board.
Instructions for removing and reinstalling the touchpad.
Identifies connectors and switches on Mother Board-A.
Provides switch settings for CPU/SDRAM frequency and LCD panel ID.
Identifies connectors and components on Mother Board-B.
Identifies connectors on the MDC/LAN transfer board.
Identifies connectors and switches on the charger board.
Identifies switches and connectors on the IQSB board.
Identifies switches and connectors on the Easy Start Button board.
Identifies major components on the main board (Side A).
Identifies major components on the main board (Side B).
Describes the pin functions for Pentium III/Celeron FC-PGA2 CPUs.
Details the pin descriptions for the SiS630S chipset.
Explains the system BIOS power-on self-test (POST) and error detection.
Lists system soft BIOS error codes for PIO debug.
Lists diagnostic tools including LED and PIO connector.
Shows the circuit diagram for the PIO diagnostic setup.
Troubleshooting steps for issues with no power.
Troubleshooting steps for no display on LCD or monitor.
Troubleshooting steps for VGA controller failure causing no LCD display.
Troubleshooting steps for no display on an external monitor.
Troubleshooting steps for memory test errors or system hangs.
Troubleshooting steps for keyboard, touch-pad, or ESB test errors.
Troubleshooting steps for errors when reading data from CD-ROM drive.
Troubleshooting steps for hard drive errors or spinning motor.
Troubleshooting steps for errors when a USB device is installed.
Troubleshooting steps for no sound from the speaker after driver installation.
Troubleshooting steps for errors with a mouse or other I/O device.
Troubleshooting steps for printer issues with PIO port.
Troubleshooting steps for errors with a PC card device.
General