Mitel
®
5312/5324 IP Phone User Guide – Issue 2, June 2010 Page 1
Getting Started
Getting Started
Welcome
The instructions in this guide are for using the Mitel 5312/5324 Internet Protocol (IP) Phone on
the Mitel 5000 Communications Platform (CP). The Quick Reference Guide located at the
beginning of this guide is an overview of frequently used features.
Your IP phone should be powered on and ready to use. If the display is blank, or if the display
name, extension number, or time or date are incorrect, contact your system administrator for
assistance.
Because a variety of voice mail products work with the 5000 CP, this guide does not include
voice mail instructions. For voice mail instructions, refer to the voice mail user guide for your
system. For example, refer to the Enterprise Messaging, Basic Voice Mail, and Embedded
Voice Mail Card User Guide, part number 835.3205, or the Mitel NuPoint Unified
Messaging
User Guide on the Mitel Web site (http://edocs.mitel.com). Contact your system administrator
for more information about your voice mail system.
About Your Phone
The 5312 and 5324 IP Phones are full-feature, dual port phones that provide voice
communication over an IP network. Both phones have a back-lit liquid crystal display (LCD),
display-assisted feature access, on-hook dialing, and a Ring/Message Indicator.
For one-touch feature access, the 5312 IP Phone has 12 programmable buttons and the 5324
IP Phone has 24 programmable buttons. Both phones have 10 fixed feature buttons to access
commonly used features such as Transfer, Redial, Mute, and so on.
NOTE
Because many phone features can be programmed to perform various tasks,
some features may work differently than the descriptions in this guide. Contact
your system administrator for more information.
To Next Page
Loading...
Need help?
Processor and Memory
Weight and Dimensions
