Mitel 5324 User Manual

Personalizing Your Phone
Page 24 Mitel
®
5312/5324 IP Phone User Guide– Issue 2, June 2010
Resetting the IP Phone to the Default Settings
Resetting the IP phone to the default settings does the following:
• Returns all volume settings to the default levels. See “Changing Volume Levels” on
page 15.
• Cancels Background Music. See “Listening to Background Music” on page 16.
• Cancels Callback (queue) requests. See “Requesting a Callback (Queuing the Phone)” on
page 28.
• Restores Handsfree Mode. “Using Handsfree Mode” on page 35.
• Cancels Manual Call Forwarding. See “Manual Call Forwarding” on page 38.
• Cancels System Forwarding. See “System Forwarding” on page 38.
• Cancels Do-Not-Disturb (DND). See “Using Do-Not-Disturb (DND)” on page 53.
• Restores Page settings. See “Paging Other System Users” on page 55.
• Resets hunt group calls. See “Hunt Groups” on page 57.
To reset your IP phone to the default settings:
Dial 394. STATION DEFAULTED appears.
Switching Keymaps
Keymaps are the default button assignments on your IP phone. Your system may have
programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your IP phone is idle:
With the handset on-hook, dial 399. The display shows either ALTERNATE (or)
STANDARD KEYMAP IS ACTIVE.
To switch between keymaps during a call:
Press
(Special), and then dial 399.
Activating Door Relay
If the Activate Door Relay feature is enabled, you can unlock a door (i.e., “buzz” it open)
through your IP phone.
You can enter the Activate Door Relay feature code while idle or while on a call. This allows you
to activate the feature while talking to a communications device mounted at the door without
first having to hang up. When activated while on a call, the feature will not affect the call in
progress other than to show a short confirmation on the display.
You can add the Activate Door Relay feature to a phone keymap button, just like any other
station feature.
To unlock a door:
While idle or while on a call, dial 332. The door is unlocked.

Mitel 5324 Specifications

Processor and Memory

processor type	TNETV1055 (MIPS)
processor speed	125 MHz
DSP speed	165 MHz
RAM	16 MB
ROM	8 MB

Weight and Dimensions

dimensions (phone only)	9.1 in x 7.5 in x 3.5 in (23 cm x 19 cm x 9 cm)
weight (phone only)	1.65 lbs or 0.75 kg
dimensions (packaged)	9.8 in x 8.3 in x 3.9 in (25 cm x 21 cm x 10 cm)
weight (packaged)	2.49 lbs or 1.13 kg