Mitel 5360 - Muting the Conference Unit; Placing the Conference Unit in Presentation Mode

Getting Started
Page 10 Mitel
®
5360 IP Phone User Guide – , April 2013
Muting the Conference Unit
You can mute the Conference Unit so that conversation or noise near the Conference Unit
cannot be heard by individuals being conferenced.
To mute the Conference Unit:
Press Mute.
Placing the Conference Unit in Presentation Mode
Presentation Mode should be used when only one individual will be speaking into the
Conference Unit. If another individual near the unit wishes to speak, you should disable
Presentation Mode. Presentation Mode minimizes extraneous noise.
To enable/disable Presentation Mode:
Toggle Presentation Mode on or off in the Conference Controller application.