Mitel 5360 - Changing Your Station Passcode

Mitel
®
5360 IP Phone User Guide – Release 5.0, April 2013 Page 65
Call Features
Changing Your Station Passcode
You can use Remote Programming to change the station (phone) passcode. See page 60 for
details on setting up a passcode for your extension.
To change your station passcode using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #.
5. Dial 392.
6. Enter the new passcode followed by
#.
7. Enter the new passcode again followed by #.