Answering and Placing Calls
Page 40 Mitel
®
5360 IP Phone User Guide – , April 2013
Assigning Speed-Dial Numbers to Programmable Buttons
You can assign Station or System Speed-Dial numbers to your programmable buttons.
To program a Station Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 382.
4. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial bin.
• Enter the speed-dial bin (0 to 9), or select the menu button designation from the
display.
To program a System Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 381.
4. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial location.
• Enter the speed-dial location (000 to 999), or select the menu button designation
from the display.
NOTE
Before or after assigning the speed-dial number to a programmable button, make
sure the speed-dial number has either a Station Speed Dial bin or System Speed
Dial location assigned to it. For System Speed Dial numbers, numbers are pre-
assigned to the System Speed Dial locations (000 to 999) by your system
administrator. Therefore, you just need to choose a System Speed Dial location
that you want to use (see “Using System Speed Dial” on page 38 for details). For
Station Speed Dial numbers, you must manually store numbers in the Station
Speed Dial bins (0 to 9). See “Storing Station Speed-Dial Numbers” on page 38.
To Next Page
Loading...
