11. Supplementary (Operation)
11-3-4. Gas refrigerant amount check
Row Item Format
1st File Type 802
2nd
Data output
date
Output date
3rd Item
“Address,Date and Time 1,CheckResult1,Date and Time 2,
CheckResult2,Date and Time 3,CheckResult3, Date and Time 4,
CheckResult4,Date and Time 5,CheckResult5,Date and Time 6,
CheckResult6,Date and Time 7, CheckResult7,Date and Time 8,
CheckResult8,Date and Time 9,CheckResult9,Date and Time 10,
CheckResult10”
4–35th Data
Outdoor unit address, Check date and time 1, Check result 1, Check date
and time 2, Check result 2, Check date and time 3, Check result 3, Check
date and time 4, Check result 4, Check date and time 5, Check result 5,
Check date and time 6, Check result 6, Check date and time 7, Check
result 7, Check date and time 8, Check result 8, Check date and time 9,
Check result 9, Check date and time 10, Check result 10
* Only the addresses of the connected units will appear.
Item Description
CSV output
Ŷ File name
<For AE-C>
“OC”_“RefrigerantCharge”_[YYYY]-[MM]-[DD]_“AE”[AE-C No.].csv
<For EW-C>
“OC”_“RefrigerantCharge”_[YYYY]-[MM]-[DD]_“AE”[AE- No.]-[EW-C No.].csv
Example: OC_RefrigerantCharge_2024_03_10_AE01-2.csv
* Date format ([YYYY], [MM], [DD]) will use the format set in the initial settings.
Ŷ File format
Ŷ File sample
802
2024/10/14
Address,Date and Time 1,CheckResult1,Date and Time 2,CheckResult2,Date and Time3,CheckResult3,Date and Time4,
CheckResult4,Date and Time5,CheckResult5,Date and Time6,CheckResult6,Date and Time7,CheckResult7,Date and Time8,
CheckResult8,Date and Time9,CheckResult9,Date and Time10,CheckResult10
51,2023/11/29 21:45,Normal,2023/08/25 23:01,Normal,2023/05/30 22:15,Normal,2023/02/27 21:05,Normal,2023/02/26
22:04,Normal,2023/11/25 21:20,Normal,2023/08/27 22:36,Normal,2023/05/26 22:11,Normal,2023/02/19 21:05,Normal,,
55,2023/02/19 22:45,Low,2023/11/29 21:46,Normal,2023/8/25 23:02,Normal,2023/05/30 22:16,Normal,2023/02/26
22:41,Normal,,,,,,,,,,
61,2024/10/14 11:51,Unmeasurable,,,,,,,,,,,,,,,,,,
To Next Page
Loading...
