16. Initial settings - Basic settings/operation
164
WT09991X01
16-2-4. Sub menu tab: Outdoor Unit Name
Register the names of the outdoor units and sub-outdoor units connected to each AE-C/EW-C.
Tapping [Unit Settings] - [Outdoor Unit Name] will display the Outdoor Unit Name screen.
Note
• Outdoor unit names can be up to 20 characters in length. (Recommended name length is 12 characters or
less.)
However, the following characters cannot be used. < > & " '
Item Function and description
(A)
Target centralized
controller
Select the number of the AE-C/EW-C controller from the pull-down list.
(B) Outdoor unit
Outdoor unit and sub outdoor unit addresses are displayed in order of address
number.
(C) Outdoor unit name
Use to configure the names of outdoor units configured on the Refrigerant System
settings screen.
(D) [Save]/[Back]
After completing the setting, tap [Save].
To cancel the setting, tap [Back].
WT09991X01 英語IB詳細編 (3校 正式版).book 164 ページ 2024年7月30日 火曜日 午後3時34分