Mitsubishi Electric AE-C400 - 17-1-1.Settings for Peak Cut Control Method (Energy Saving Control)

17. Supplementary information (Initial settings)
199 WT09991X01
17-1-1. Settings for peak cut control method (energy saving control)
For energy saving control, the control level is determined from the demand level and electric energy value
according to the selected peak cut method, and the outdoor/indoor units are operated at the capacity
appropriate to the control level.
Tap [Settings] on the operation management screen and then tap [Function] to display the function settings
screen. Tap [Peak Cut] to display the peak cut settings screen.
Item Function and description
(A) AE-C/EW-C settings
The numbers and names of the AE-C/EW-C controllers to be displayed and
the selected peak cut method are displayed.
(B) [Advanced] Tapping this button will display the peak cut control settings screen.
(C) [Close]
Tapping this button will close the settings screen and display the function
settings screen.
(A)
(C)
(B)
WT09991X01 英語IB詳細編 (3校 正式版).book 199 ページ ２０２４年７月３０日 火曜日 午後３時３４分