Mitsubishi Electric AE-C400 - System Configuration Settings

16. Initial settings - Basic settings/operation
156
WT09991X01
[2] System configuration settings
(D-1)
(D-2)
(D-3)
(D-9)
(D-11)
(D-12) (D-13)
(D-5)
(D-6)
Item Function and description
(D-1)
M-NET Settings
M-NET Address
Normally, enter [0].
(D-2)
M-NET Settings
Range of Prohibited
Controllers
Select [SC/RC] to prohibit operation from both sub system controllers and
local remote controllers.
Select [RC Only] to prohibit operation from only local remote controllers.
(D-3) External Input Setting
If using an external contact input, select its function from the list.
(D-5)
External Output2
Setting
If using an external contact output (CN6), select its function from the list.
(D-6)
External
RefLeakAlarm Setting
Set whether or not the controller buzzer will sound when a refrigerant leak is
detected.
WT09991X01 英語IB詳細編 (3校 正式版).book 156 ページ ２０２４年７月３０日 火曜日 午後３時３４分