Mitsubishi Electric AE-C400 - 22-3.Bacnet Setting Tool Installation Procedure

22. Initial settings: software installation
230
WT09991X01
22-3. BACnet Setting Tool installation procedure
This section explains the installation procedure for the BACnet Setting Tool.
The following installation procedure can also be used to upgrade the BACnet Setting Tool.
Step
1. Before starting the procedure, check that the version of .NET Framework is Ver. 4.8 or later.
• You can find the version of .NET Framework installed on your PC by selecting Control Panel in the
Windows Start menu and then Programs and Features.
• For the installation procedure, refer to the specified page. ".NET Framework installation procedure
(page 234)"
• When installing the tool in an offline environment, first download the offline installer.
2. Launch the setup file (SetBACnetAEC_V***.msi) for the BACnet Setting Tool.
• The setup wizard screen will appear.
• V*** indicates the version. ex.) For V110, the version is 1.10.
• If a security warning screen appears, tap [Run].
3. Tap (A).
4. Select (B) and tap (C).
(A)
(C)
(B)
WT09991X01 英語IB詳細編 (3校 正式版).book 230 ページ ２０２４年７月３０日 火曜日 午後３時３４分