16. Initial settings - Basic settings/operation
170
WT09991X01
16-2-7. Sub menu tab: Energy Management Block
Set blocks for aggregation units.
Tapping [Unit Settings] - [Energy Management Block] will display the Energy Management Block Settings
screen.
Note
• Energy management block names can be up to 20 characters in length.
However, the following characters cannot be used. < > & " '
(F)
(E)
(G)
(C)
(A)
(B)
(D-1)
(D)
Item Function and description
(A)
Target centralized
controller
Select the number of the AE-C/EW-C controller from the pull-down list.
(B) Page navigation
The page for the energy management block number selected from the pull-
down list is displayed.
(C) Copy from block settings Create energy management blocks by copying block settings.
(D)
Energy management
block name
The energy management block name for each energy management block
number (D-1) is displayed.
(E) Member blocks Tapping the icon displays the screen for registering blocks.
(F)
Interlocked member
LOSSNAY with heater
and humidifier
Tapping the icon displays the screen for registering unit addresses.
(G) [Save]/[Back]
After completing the setting, tap [Save].
To cancel the setting, tap [Back].
WT09991X01 英語IB詳細編 (3校 正式版).book 170 ページ ２０２４年７月３０日 火曜日 午後３時３４分
To Next Page
Loading...
