11. Supplementary (Operation)
. Operation
This section explains how to operate each group and all groups collectively.
>@ Operating the units
In the group list, click [Advanced settings] to switch to the operation settings screen, which shows the current
operation status in the “Operation items” and “Other operation status information” areas. Change the desired
operation items and touch [Send] to reflect the changes. Touch [Cancel] to return to the group list without sending
any changes.
Air conditioning unit group
Operation settings screen for air conditioning unit groups is as follows.
If Interlocked LOSSNAY (ventilator) is set, then under the air conditioning unit group operating items will be
displayed the interlocked LOSSNAY operating items.
Advanced settings
Cancel
Group name
Operation items
Other operation status
information
Status display
Note: The “Other operation status information” area
shows the group icon and the operation status
(excluding the room temperature or the set
temperature) that are displayed in status display
area in the group list.
Cancel
Operation
prohibition mark
ON/OFF
Operation mode
Set temperature
Air Direction
Fan Speed
Filter Sign Reset
Interlocked
LOSSNAY ON/OFF
Interlocked
LOSSNAY Fan
Speed
Send
Other operation
status information
To Next Page
Loading...
