16. Initial settings - Basic settings/operation
150
WT09991X01
16-1-2. Sub menu tab: Control Target
This tab is for making settings to monitor and operate the units that are connected to different AE-C/EW-C
controllers.
Tapping [Basic Settings] - [Control Target] will display the Control Target Settings screen.
Note
• When there is only one connected AE-C/EW-C controller (or only one M-NET network) in the system, the
items on this tab do not need to be set.
Item Function and description
(A) Centralized controller
The number and the name of the AE-C/EW-C controller that has been registered
on the Connection tab are displayed.
(B)
Control Target
Settings and Control
Target
Set the following items to monitor and operate the units that are connected to
different AE-C/EW-C controllers.
• System manager (billing), System manager (no billing)
This item shows the AE-C/EW-C controller that manages the entire system.
Only one AE-C/EW-C controller can be the system manager.
• WEB Display
The numbers of the controllers (B) that are monitored and operated via the
Web are displayed.
• LCD Display
The numbers of the controllers (B) that are monitored and operated on the
LCD screen are displayed.
(C) [Edit]
Tapping this button displays the AE-C/EW-C Settings screen to configure the
settings for the system manager, Web display, and LCD display.
(D) [Save]/[Back]
After completing the setting, tap [Save].
To cancel the setting, tap [Back].
WT09991X01 英語IB詳細編 (3校 正式版).book 150 ページ ２０２４年７月３０日 火曜日 午後３時３４分
To Next Page
Loading...
