16. Initial settings - Basic settings/operation
151
WT09991X01
[1] AE-C/EW-C settings screen
Configure settings for the AE-C/EW-C controllers added on the Connection Settings screen that will be
displayed and managed on the LCD screen or Web screen.
Tapping [Edit] on the Control Target Settings screen will display the Centralized Controller Settings screen.
Item Function and description
(A) System manager
This item is used to specify the AE-C/EW-C that will manage the system. Put a
check here to allow the AE-C/EW-C to control other AE-C/EW-C.
Only one AE-C/EW-C in a system can be used to manage the system.
(B)
Use the billing
function
Entering a check here enables the apportioned electricity billing function of the
system manager.
(C) WEB Display
The numbers of the AE-C/EW-C to be displayed on the Web browser are
displayed.
Tap [Edit] to change the AE-C/EW-C to be controlled.
(D) LCD Display
The numbers of the AE-C/EW-C to be displayed on the LCD are displayed.
Tap [Edit] to change the AE-C/EW-C to be controlled.
(E) [OK]/[Cancel]
After completing the setting, tap [OK].
To cancel the setting, tap [Cancel].
WT09991X01 英語IB詳細編 (3校 正式版).book 151 ページ ２０２４年７月３０日 火曜日 午後３時３４分
To Next Page
Loading...
