Mitsubishi Electric AE-C400 - Safety Precautions; General Precautions

6
Safety precautions
WT09991X01
Safety precautions
 Thoroughly read the following safety precautions prior to installation.
 Observe these precautions carefully to ensure safety.
 After reading this manual, pass the manual on to the end user to retain for future
reference.
 The user should keep this manual for future reference and refer to it as necessary. The
manual should be made available to those who repair or relocate the product. Make sure
that the manual is passed on to any future air conditioning system user.
 General precautions
:
indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
:
indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
WARNING
CAUTION
Do not use the product where large amounts of oil, steam, organic solvents, or corrosive
gases (such as ammonia, sulfuric compounds, and acids) are present or where acidic/
alkaline solutions or special chemical sprays are used frequently. These substances may
corrode the internal parts, resulting in electric shock, performance degradation,
malfunction, smoke, or fire.
To reduce the risk of injury, electric shock, or fire, do not alter or modify the product.
To reduce the risk of injury, keep children away while installing, inspecting, or repairing
the product.
To reduce the risk of fire or explosion, do not place flammable materials or use flammable
sprays around the product.
To reduce the risk of short circuits, current leakage, electric shock, malfunction, smoke,
or fire, do not wash the product with water or any other liquid.
To reduce the risk of electric shock, malfunctions, smoke, or fire, do not touch the
electrical parts, USB memory device, or touch panel with wet hands.
To reduce the risk of injury or electric shock, before spraying a chemical around the
product, stop the operation and cover the product.
If you notice any abnormality (e.g. a burning smell), stop the operation, turn off the
product, and contact your dealer. Continuing the use of the product without correcting
the abnormality may result in electric shock, malfunction, or fire.
Properly install all required covers to keep dust and moisture out of the product. Dust or
moisture entering the product may result in electric shock, smoke, or fire.
WARNING
WT09991X01 英語IB詳細編 (3校 正式版).book 6 ページ ２０２４年７月３０日 火曜日 午後３時３４分