Mitsubishi Electric AE-C400 - Page 15

2. Parts names
15
WT09991X01
(F)
(H)
(I)
(J)
(G)
Item
Function and description
Push switch
(F) -
(G)
RESET
Restarts the controller.
(H) Rotary switch
SW1 0 to F
Sets the IP address of LAN1.
When the rotary switch is set to 0 (factory default), the setting made with the Initial Setting Tool is
valid.
When the rotary switch is set to a value other than 0, the value set with the rotary switch is valid.
(I)
USB port (Type-C) (USB 3.1 Gen1)
—
(J)
Service cover
To be removed when the AC power cable or M-NET transmission cable is connected to the
controller.
WT09991X01 英語IB詳細編 (3校 正式版).book 15 ページ ２０２４年７月３０日 火曜日 午後３時３４分