16. Initial settings - Basic settings/operation
175
WT09991X01
[1] Configuring AI controllers
Input upper and lower limits for the measurement range on the measurement range input screen (b).
Step
1. Tap [Unit Settings] - [AI Controller] to display
the AI Controller Settings screen.
2. Tap (A) to display (a).
3. Select the addresses of AI controllers to be
registered from (a).
4. Tap [OK] in (a) to close (a).
5. Tap (B) to input the sensor name.
6. Select the sensor to be used from (C) to display
the measurement range input screen (b).
7. Configure the items in (b).
8. Tap (D) to save the settings.
If a temperature sensor is selected If a humidity sensor is selected
Item Function and description
(b-1) [Acquire]
The ID and password input screen opens. Once authenticated, sensor
values will be acquired and measurement values are displayed.
(b-2) Offset
Select an offset from the pull-down list. The selection will be reflected to
modified values.
(b)
(b-1) (b-2)
(b)
WT09991X01 英語IB詳細編 (3校 正式版).book 175 ページ ２０２４年７月３０日 火曜日 午後３時３４分
To Next Page
Loading...
