11. Supplementary (Operation)
Item Description
Operation
prohibition mark
Operation prohibition mark
is displayed on the operation items that are prohibited from the local
remote controllers.
is displayed when one or more operation items are prohibited.
Note: The operation prohibition setting can be made by a building manager and tenant managers.
Send Touch to reflect the changes and return to the group list.
Cancel
Touch
to return to the group list without sending any changes.
Note: When the indoor units support a dual-set-point function, two different set temperatures (one for cooling and the other for heating)
can be set for the Auto mode. When this function is used, indoor units automatically switch over between cooling and heating,
based on the room temperature, to maintain the room temperature within the two predetermined temperatures. The graph below
shows an example of operation patterns of units operated in the dual-set-point mode.
If the indoor units of the selected unit group support the dual-set-point function, two different set temperatures (one for cooling and
the other for heating) can be set.
1) Temperature setting for a group in which all indoor units support dual-set-point mode
Set temp.
(Cool)
Automatically switches over between cooling and heating,
based on the room temperature, to maintain the room
temperature within the two predetermined temperatures.
Room
temp.
Set temp.
(Heat)
CoolHeat
Operation patterns in the dual-set-point mode
Room temperature
fluctuates in response
to changes in outdoor
temperature.
Heat Cool
Set temperature for cooling
Set temperature for heating
To Next Page
Loading...
