11. Supplementary (Operation)
2 LOSSNAY unit (ventilator) group
Item Description
ON/OFF
Touch [ON] or [OFF] to turn on or off the units.
Note: If the units are turned off during the Night Purge operation, the Night Purge operation will not be
performed until the next day.
Ventilation mode
Touch
to display the ventilation mode selection screen, and select the desired ventilation mode.
Touch
to return to the operation settings screen.
Note: This item will not appear during the Night Purge operation.
Fan Speed
Touch
or to adjust the fan speed.
Auto
Note: During the Night Purge operation, the fan speed can be adjusted but will not be displayed.
Humidify
Touch [ON], [OFF], or [Auto] to switch the operation status of the humidification function.
Note: This item will not appear during the Night Purge operation.
Filter Sign Reset
Click
to switch between resetting and not resetting the filter sign.
To reset, display a checkmark (
).
Note: If a filter sign in the group has not been triggered, then this item will not appear.
Other operation
status information
Operation status other than the operation items will appear.
Operation
prohibition mark
Operation prohibition mark
is displayed on the operation items that are prohibited from the local
remote controllers.
is displayed when one or more operation items are prohibited.
Note: The operation prohibition setting can be made by a building manager and tenant managers.
Fan Speed
Filter Sign Reset
ON/OFF
Ventilation mode
Operation prohibition mark
Humidify
Other operation status information
Cancel
Send
To Next Page
Loading...
