11. Supplementary (Operation)
In the group list, touch [Batch operation]. If different equipment types exist together in a system, a screen to
select an equipment type will appear.
Touch [Advanced settings] of an equipment type of the groups to collectively change their settings.
In the operation settings screen, change the required settings and touch [Send] to reflect the changes.Click
[Cancel] to return to the previous screen without making any changes.
Note: For groups that have set temperature ranges limit, then the range of temperatures that can be set is restricted.
Note: If there are groups for which some items cannot be operated within the corresponding group, then sending these items to that
group is not possible.
Note: The set temperature is not displayed when the operation group contains both free-plan units and outlet air temperature control
units.
Cancel
Advanced settings
Batch operation
Click to operate all groups at once.
Send
>@ 2SHUDWLQJWKHXQLWVLQDOOJURXSV
To Next Page
Loading...
