Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Page 327

15 DATA COMMUNICATIONS USING USER FRAMES
15.5 Application Program for Data Transmission using a Combination that does not Specify the Start Frame
325
15
(3) Set CR/LF to "Do not send".
Set the send pointer to 1.
Set the output quantity to 5.
Set an arbitrary send data.
Set an arbitrary send data in send area.
Set the send user frame.
(101) Set normal completion flag.
(103) Set abnormal completion flag.
D0
D1
D2
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
(0004H)
(3412H)
(AB56H)
(03F2H)
(03F3H)
(8001H)
(8000H)
(041BH)
(0000H)
(0001H)
(0000H)
(0000H)
(0001H)
(0005H)
(0004H)
(3412H)
(AB56H)
(03F2H)
(03F3H)
(8001H)
(8000H)
(041BH)
(0000H)
(0001H)
(0000H)
(0001H)
(0005H)
Normal end Abnormal end
Transmission data count Transmission data count
Transmission data Transmission data
Transmission frame No. Transmission frame No.
Interface No. Interface No.
Transmission result Transmission result
(other than 0000H)
CR/LF output CR/LF output
Output head pointer Output head pointer
Output counter Output counter