344
16 TRANSPARENT CODES AND ADDITIONAL CODES
16.6 Data Communication Using Bidirectional Protocol
When the transparent code for receiving specification is enabled, the codes for receivable arbitrary data portion and the codes
for the received data which is stored in the receive area on the buffer memory are as shown below.
When the data length unit is in bytes and the data length is an odd byte, 00H is stored in the upper byte of the last data
storage position in the receive area.
(0) Set the reception channel to CH1.
Set the allowable number of data to be received to 6.
Set the reception direction.
(8) Execute reception
(54) Normal completion
(56) Abnormal completion
Type Receivable codes Codes stored in the receive
area
Transparent code for receiving
specification portion
Additional code 01H to FFH (Delete)
Transparent code 00H to FFH 00H to FFH
Data length, data portion
To Next Page
Loading...
