Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Page 551

APPENDICES APPENDIX
Appendix 7 When Connecting the Module to a Remote Head Module
549
A
Setting in the master station on CC-Link IE Field Network
Connect the engineering tool to the CPU module of the master station on CC-Link IE Field Network and set parameters.
1. Set the CPU module as follows.
[Project]  [New]
2. Click the [OK] button to add the module labels of the CPU module.
3. Set the CC-Link IE Field Network master/local module as follows.
[Parameters]  [Module Information] from Navigation window, and right click and select [Add New Module]