Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Page 554

552
APPENDICES APPENDIX
Appendix 7 When Connecting the Module to a Remote Head Module
Setting in the intelligent device station on CC-Link IE Field Network
Connect the engineering tool to the remote head module of the intelligent device station on CC-Link IE Field Network and set
the parameters.
1. Set the remote head module as follows.
[Project]  [New]
2. Set the items in "Network Required Setting" of "CPU Parameter" as follows.
[Navigation window]  [Parameter]  [RJ72GF15-T2]  [CPU Parameter]  [Network Required Setting]
3. Set the C24 as follows.
[Parameters]  [Module Information] from Navigation window, and right click and select [Add New Module]