Mitsubishi Heavy Industries RC-EX3D - Temp Increment Setting

─
59
─
■
Temp increment setting
Temperature increment for the change of the set temp can be changed.
■
Set temp display
Set temp displayed on the TOP screen can be changed.
1
Tap the Menu button on the TOP screen and select User setting
⇒
Administrator settings
⇒
Temp increment setting .
2
The Temp increment setting screen is displayed.
Tap a desired temperature increment.
1
1.0°C........ Setting temperature can be set at 1.0°C intervals.
(ex. …
⇔
24.0°C
⇔
25.0°C
⇔
26.0°C
⇔
…)
2
0.5°C........ Setting temperature can be set at 0.5°C intervals.
(ex. …
⇔
24.0°C
⇔
24.5°C
⇔
25.0°C
⇔
…)
Temp increment setting
Back
Select the item.
1
Tap the Menu button on the TOP screen and select User setting
⇒
Administrator settings
⇒
Set temp display .
2
The Set temp display menu is displayed.
1
Display set temp
... Set temp is displayed.
2
Display temp difference from base temp
... The difference from the base temperature is displayed. When
you select the Display temp difference from base temp, the
Base temp setting screen is displayed (
☞
2).
3
Set the base temperature.
Set temp display
Display set temp
Back
Select the item.
Display temp difference from base temp
Base temp setting
Set the base temp
Back
Tap
▲▼
to set temp & tap [Set].
Set