─
76
─
2
The lter sign reset menu screen is displayed.
To reset the lter sign, tap
Reset . (
☞
3)
To set next cleaning date, tap Setting next cleaning date. (
☞
4)
3
Acknowledge screen for the Filter sign reset screen is displayed.
Tap the
Yes button.
If you do not want to reset, tap the
Back button.
Filter sign reset
Reset
Back
Select the item.
Setting next cleaning date
Filter sign reset
Do you want to reset the lter sign?
Back
Select the item.
Yes
4
The Setting next cleaning date screen is displayed.
Select a desired date with the
▲ ▼ buttons and tap the
Set button.
The message of “Filter cleaning. Touch here.” will be displayed on
the set date.
· When setting next cleaning date, the Clock setting must be made. (
☞
page 36)
Advice
Setting next cleaning date
Back
Set the date.
Set
Cancel
dd mm
1
Tap the message display on the TOP screen.
You can also perform lter sign reset from the menu before the
message “Filter cleaning. Touch here.” is displayed.
Tap the
Menu button on the TOP screen and select
Filter
⇒
Filter sign reset .
You can also use the
F1
and
F2
switches to perform this operation.
Set the lter sign reset to the F1 ( F2 ) switch using the Switch
function (
☞
page 66) to perform this operation.
Menu
Direction
16:00
(Mon)
F1: High power F2: Energy-saving
Timer
Filter cleaning. Touch here.
Set temp
MEETING1
Room(R/C)
In order to announce the time for cleaning of the air lter, the message of “Filter cleaning. Touch here.” is displayed when
the cumulative operation time of the IU reaches the preset time. After you clean the lter, you must reset the operation time.
Filter sign reset
To Next Page
Loading...
