─
86
─
This message is displayed if the refrigerant sensor is disconnected.
Call the phone number shown to inform us of the content of the
message.
When the Remote controller alarm sound setting is enabled, the alarm
sounds and the display ashes. To stop the alarm and the ashing
display, push the
Run/Stop switch.
This message is displayed if the refrigerant sensor fails.
Call the phone number shown to request a replacement of the refrigerant
sensor.
When the Remote controller alarm sound setting is enabled, the alarm
sounds and the display ashes. To stop the alarm and the ashing
display, push the
Run/Stop switch.
■
“Refrigerant sensor is disconnected.” message display
■
“Refrigerant sensor is faulty.” message display
If you want to turn off the message, tap the message display area while
the message is being displayed.
The Refrigerant sensor sign reset screen is displayed.
Tap the
Yes button.
If you do not want to reset, tap the
Back button.
If you do not replace the sensor, the message reappears after
720 hours.
To Next Page
Loading...
