Mitsubishi ASX 2019

NOTE
l
If the ignition switch or the operation mode
is left in ACC, the accessory power will au-
tomatically turn off after a certain period of
time and you will no longer be able to use
the Bluetooth
®
2.0 interface. The accessory
power comes on again if the ignition switch
or the engine switch is operated.
Refer to “ACC power auto-cutout function”
on page 6-12.
l
The Bluetooth
®
2.0 interface cannot be used
if the Bluetooth
®
device has a flat battery or
the device power is turned off.
l
Hands-free calls will not be possible if your
phone does not have service available.
l
If you place the Bluetooth
®
device in the
luggage compartment, you may not be able
to use the Bluetooth
®
2.0 interface.
l
Some Bluetooth
®
devices are not compatible
with the Bluetooth
®
2.0 interface.
l
For details on the Bluetooth
®
2.0 interface,
you can see to access via the MITSUBISHI
MOTORS website.
Please read and agree the “Warning about
Links to the Web Sites of Other Companies”
because it connects other than MITSUBISHI
MOTORS website.
http://www.mitsubishi-motors.com/en/prod-
ucts/index.html
l
Software updates by cellular phone/digital
audio device manufacturers may change/
alter device connectivity.
Steering control switch and microphone
® p. 7-47
Voice recognition function ® p. 7-48
Useful voice commands ® p. 7-49
Speaker enrollment function ® p. 7-50
Connecting the Bluetooth® 2.0 interface and
Bluetooth® device ® p. 7-52
Operating a music player connected via Blue-
tooth® ® p. 7-57
How to make or receive hands-free calls
® p. 7-57
Phone book function ® p. 7-60
Steering control switch and mi-
crophone
1- Volume up button
2- Volume down button
3- SPEECH button
4- PICK-UP button
5- HANG-UP button
6- Microphone
Volume up button
Press this button to increase the volume.
Volume down button
Press this button to decrease the volume.
SPEECH button
l
Press this button to change to voice rec-
ognition mode.
While the system is in voice recognition
mode, “Listening” will appear on the au-
dio display.
l
If you press the button briefly while in
voice recognition mode, it will interrupt
prompting and allow voice command in-
put.
Pressing the button longer will deacti-
vate the voice recognition mode.
l
Pressing this button briefly during a call
will enable voice recognition and allow
voice command input.
Bluetooth
®
2.0 interface*
7-47
OGAE19E1
For pleasant driving
7