Mitsubishi FX3G Series Programming Manual

79
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
3 Instruction List
3.3 Applied Instructions ... in Ascending Order of FNC Number
1
Introduction
2
Overview
3
Instruction List
4
Devices in Detail
5
Specified the Device & Constant
6
Before Programming
7
Basic Instruction
8
FNC00-FNC09 Program Flow
9
FNC10-FNC19 Move & Compare
10
FNC20-FNC29 Arith. & Logic Operation
External Device Communication (Inverter Communication)
270 IVCK Inverter Status Check *6 333 –––––
Section
30.1
271 IVDR Inverter Drive *6 333 –––––
Section
30.2
272 IVRD Inverter Parameter Read *6 333 –––––
Section
30.3
273 IVWR Inverter Parameter Write *6 333 –––––
Section
30.4
274 IVBWR
Inverter Parameter Block
Write
––33 –––––
Section
30.5
275 IVMC Inverter Multi Command *9 3 *8 *8 – – – – –
Section
30.6
276 to
277
– –
Data Transfer 3
278 RBFM Divided BFM Read – – 3 *5 – – – – –
Section
31.1
279 WBFM Divided BFM Write – – 3 *5 – – – – –
Section
31.2
High-speed Processing 2
280 HSCT
High-speed Counter
Compare With Data Table
––33 –––––
Section
32.1
281 to
289
– –
Extension File Register Control
290 LOADR Load From ER 3333 –––––
Section
33.1
291 SAVER Save to ER – – 33 –––––
Section
33.2
292 INITR Initialize R and ER – – 33 –––––
Section
33.3
293 LOGR Logging R and ER – – 33 –––––
Section
33.4
294 RWER Rewrite to ER 333*3 – – – – –
Section
33.5
295 INITER Initialize ER – – 3 *3 – – – – –
Section
33.6
296 to
299
– –
*1: The instruction is provided in the FX 2N /FX 2NC Series Ver. 3.00 or later. *6: The instruction is provided in the FX 3G Series Ver. 1.10 or later.
*2: The function is changed in the FX 3UC Series Ver. 1.30 or later. *7: The instruction is provided in the FX 3U /FX 3UC Series Ver. 2.61 or later.
*3: The instruction is provided in the FX
3UC Series Ver. 1.30 or later. *8: The instruction is provided in the FX 3U /FX 3UC Series Ver. 2.70 or later.
*4: The function is changed in the FX
3UC Series Ver. 2.20 or later. *9: The instruction is provided in the FX 3G Series Ver. 1.40 or later.
*5: The instruction is provided in the FX 3UC Series Ver. 2.20 or later.
FNC No. Mnemonic Symbol Function
FX3G
FX3GC
FX3U
FX3UC
Applicable PLC
Reference
FX1S
FX1N FX2N
FX1NC FX2NC
nIVCK DS2S1
nIVDR S3S2S1
nIVRD DS2S1
nIVWR S3S2S1
nIVBWR S3S2S1
nIVMC DS3S2S1
RBFM n1 n2Dm2m1
WBFM n1 n2Sm2m1
nHSCT DS2mS1
nSLOADR
DSAVER mS
nSINITR
D2LOGR nD1mS
nRWER S
nSINITER

Mitsubishi FX3G Series Specifications

General

Model	FX3G Series
Power Supply	AC 100-240V or DC 24V
Program Capacity	32, 000 steps
Execution Speed	0.21 µs/basic instruction
Communication Options	RS-422, USB, Ethernet
Expansion Modules	Analog, digital, communication
Programming Language	Ladder Logic, Instruction List
Built-in Functions	High-speed counters, pulse output
Analog I/O	Available via expansion modules