Mitsubishi FX3G Series

886
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-1 Programming Tool Applicability
• GX Works2 Japanese version (SWDNC-GXW2-J) is applicable to FX3G/FX3GC/FX3U/FX3UC PLCs from the
following versions.
a) FX
3G PLC
b) FX3GC PLC
c) FX3U PLC
d) FX3UC PLC
*1. Select "FX3G" in model selection for GX Works2 earlier than Ver. 1.77F.
2) GX Developer
• GX Developer English version (SWD5C-GPPW-E) is applicable to FX3G/FX3U/FX3UC PLCs from the following
versions. Select "FX3G" in model selection when creating a program for an FX3GC PLC.
a) FX3G PLC
b) FX3U PLC
*2. Select "FX3UC" in model selection for GX Developer Ver. 8.24A.
*3. Ver. 8.89T and later versions support the baud rate "38400 bps" in the communication setting for RS
and RS2 instructions, inverter communication and computer link.
FX3G PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 1.40
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3G/FX3GC
*1
Before Ver. 2.00 Ver. 1.56J or later
Ver. 2.00 Ver. 1.86Q or later
FX3GC PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 2.00
GX Works2
SWDNC-GXW2-J
Ver. 1.77F or later
• Model selection: FX3G/FX3GC
Ver. 2.00 Ver. 1.86Q or later
FX3U PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 2.70
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3U/FX3UC
Before Ver. 3.00 Ver. 1.45X or later
Before Ver. 3.10 Ver. 1.56J or later
Ver. 3.10 Ver. 1.73B or later
FX3UC PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 2.70
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3U/FX3UC
Before Ver. 3.00 Ver. 1.45X or later
Before Ver. 3.10 Ver. 1.56J or later
Ver. 3.10 Ver. 1.73B or later
FX3G PLC version
Model name
(Media model name
is shown below.)
Applicable GX Developer
version
Remarks
Before Ver. 1.10
GX Developer
SWD5C-GPPW-E
Ver. 8.72A or later
• Model selection: FX3G
Ver. 1.10 Ver. 8.78G or later
FX3U PLC version
Model name
(Media model name
is shown below.)
Applicable GX Developer
version
Remarks
Before Ver. 2.30
GX Developer
SWD5C-GPPW-E
Ver. 8.24A or later
• Model selection: FX3U(C)
*2
Before Ver. 2.41 Ver. 8.29F or later
• Model selection: FX3U(C)
Before Ver. 2.61
Ver. 8.29F or later
*3
Ver. 2.61
Ver. 8.82L or later
*3