To cancel the menu:
Press the MENU button several times.
Important:
When the MENU button doesn’t function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
After selecting the items marked with , press the
ENTER button.
4.
5.
6.
•
•
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
ITEM SETTING FUNCTION
GAMMA MODE AUTO The proper gamma mode is automatically selected
depending on the input signal. Default is AUTO.
SPORTS This is a bright mode suitable for watching sports
images.
VIDEO This is a standard mode suitable for watching video
images, etc.
CINEMA This is a mode for watching movies in dim lighting as
in a theater.
USER1 /
USER2
Select to adjust the gamma curve. (See page 33.)
CONTRAST ±30 Use to adjust the contrast of the projected image. (See
page 31.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image.
(See page 31.)
COLOR TEMP. 5 options Use to adjust the color temperature. (See page 32.)
COLOR ±10 Use to adjust the color thickness of the projected image. (See page 31.)
TINT ±10 Use to adjust the color tint of the projected image. (See page 31.)
SHARPNESS ±5 Use to adjust the sharpness of the projected image. (See page 31.)
BrilliantColor
TM
AUTO BrilliantColor
TM
works automatically in response to the gamma mode. (See page 31.)
0 - 10 Use this setting to make colors with medium brightness, such as yellow and the skin tone appear
natural. Press the
t
button to decrease the value to lessen the effect. Press the
u
button to
increase the value to heighten the effect. (BrilliantColor
TM
has no effect at value 0.)
For more enhanced color reproduction, set BrilliantColor
TM
to 0. The white area of the color
wheel is disabled, and you can reproduce true-color images.
•
ADVANCED MENU
SCREEN SIZE 2 options Select according to the screen size.
VERTICAL
LOCATION
±26
Use to adjust the position (height) of the projected image.
CTI 0 - 5 Use to correct smeared color boundaries.
INPUT LEVEL ±5 For analog signal input: The input level of video signal differs among devices to be connected.
High input level causes solid white in displayed image and low input level causes displayed image
to get dark. Use this menu to adjust the input level of analog video signal.
AUTO /
ENHANCED /
NORMAL
For digital signal input:
AUTO: The proper setting is automatically selected.
ENHANCED: Select when solid black occurs.
NORMAL: Select when grayish black occurs.
(See page 16.)
COLOR
MANAGEMENT
ON / OFF
When you turn COLOR MANAGEMENT on, you can change to any desired color by adjusting
each of GAIN and SATURATION of six different colors. (See page 33.)
AV MEMORY SAVE 3 options Select the AV MEMORY to which you save the current setting. (See page 30.)
By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See
page 30.)
INPUT LEVEL is unavailable when the digital signal is supplied from the YC
B
C
R
/YP
B
P
R
terminal of the connected device.
•
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
