Mitsubishi HC4000 User Manual

EN-45
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Type DLP
TM
projector
Model HC4000
Display technology 0.65-inch single chip DMD (aspect ratio 16:9)
Pixel: 1920 x 1080 = 2073600 pixels
Projection lens F3.0 - 3.5 f= 20.6 - 30.1 mm
Light-source lamp 230 W
Image size (projection distance) 50” min. to 300” max. (projection distance 1.5 to 9.3 m (Wide))
Maximum
resolution
Computer signal Maximum resolution: 1600 x 1200 dots
Panel resolution: 1920 x 1080 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
Component signal 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1920 x 1080 dots
Computer input [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Video input [Signal type] [Terminal type] [Line]
HDMI HDMI 1
Video input RCA 1
S-video input S 1
Component video input RCA x3 (YC
B
C
R
/YP
B
P
R
) 1
Control terminal/
others
SERIAL RS-232C (Mini DIN 8-pin)
TRIGGER DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures +41°F (+5°C) to +95°F (+35°C)
Rated voltage AC100 - 240 V, 50/60 Hz
Power consumption 3.3 A
Dimensions 345 mm (W) x 129 mm (H) x 270 mm (D) * Not including protrusion.
Weight 3.6 kg
Others S-video input Luminance signal: Vp-p=1.0 V 75 (negative sync)
Chrominance signals: Vp-p=0.286 V 75 (burst signal)
Video input Vp-p=1.0 V 75 (negative sync)
Component video
input
YC
B
C
R
: Vp-p=1.0 V 75 (Y) (negative sync)
Vp-p=0.7 V 75 (C
B
, C
R
)
Analog input RGB: Vp-p=0.7 V 75 (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital input (HDMI) HDMI interface (TMDS single link)
Dimension drawings
(unit: mm)
HC4000
345
270129
HC4000
345
270129

Mitsubishi HC4000 Specifications

General

Matrix size	0.65 \
Native aspect ratio	-
Projection distance	- m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:9
Contrast ratio (typical)	4000:1
Screen size compatibility	50 - 300 \
Projector native resolution	1080p (1920x1080)
Focus	Manual
Focal length range	- mm
Lamp power	230 W
Light source type	Lamp
Lamp power (economic mode)	190 W
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN	No
Full HD	Yes
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Placement	Desktop
Product type	Standard throw projector
Product color	Black
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	340 W
Noise level	31 dB
Noise level (economic mode)	25 dB
Dot clock scanning frequency	170 MHz

Weight and Dimensions

Weight	3600 g