Mitsubishi LE-30CTN - Items Displayed on Screen

3.1 Screen System
3. Screen system and method of change screen
16
3.1.2 Items displayed on screen
• On the LCD display, the following items will be displayed.
1) Operation mode screen
2) Adjustment mode screen
• Tension
monitoring graph - - - - - Displays the current tension while regarding the full-scale tension as
100%.
• Set tension graph- - - - - - - - - - Displays the set tension in the automatic control mode while
measuring the full-scale tension as 100%.
• Menu number - - - - - - - - - - - - Displays the menu number. This number will appear only if the
screen is stored in the menu function memory.
• Screen switching
upward/downward mark - Displays the [ R ] mark only if the screen selector keys(6) can switch
the screen upward and downward.
• Under-cursor - - - - - - - - - - - - - Displays the under-cursor only if the set value can be changed. If
changing the set value is not possible, this cursor will not appear.
• Move-to screen - - - - - - - - - - - Displays a pictogram to show the move-to screen. Using the
corresponding function key, you can go to this screen.
• Item number - - - - - - - - - - - - - Displays the corresponding item number.
Item
Menu number
Tension monitoring graph
Set value
Move-to screen
Screen switching
upward/downward mark
Under-cursor
Target tension graph
A
djustment/setting
item selection
screen
Item number
Item name
Setting screen
Set value
Function of function keys
Menu number
Move-to screen
Item number
Item name
Screen switching
upward/downward mark
Under-cursor