60
Revised History
Data Revision Description
5/2003 A First Edition
6/2003 A1
• The tension setting, manual setting and taper ratio setting screens are added.
- - - - - - - - - - - - - - - - - - - - - - - - - p. 15 and 20
• The AOC wiring between the servo amplifiers A and B is added. - - - - - p. 44
• Reel inertia mass unit x 10
2
kg → x 10
3
kg (Error is corrected.) - - - - - - p. 45
7/2003 A2 The panel figure name is changed. (Error is corrected.) - - - - - - - - - - - - - -p. 9
11/2004 B
• The zero tension detection function is added.
• AI3 input is erased. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - p. 22
• The position of the resistor for upper limit setting is changed. - - - - - - - p. 43
• The reference section is changed (11.3 → 12.3). - - - - - - - - - - - - - - - p. 48
• The power switch symbol is erased. - - - - - - - - - - - - - - - - - - - - - - - - - p. 51
• Other errors including the paragraph format are modified.
3/2006 B1
Errors are corrected (u →
X, t → W). - - - - - - - - - - - - - - - - - - - - - - - - -p. 39
10/2008 C The sentence "In conformity to the JIS****" is deleted. - - - - - - - - - - - - - - p. 49
8/2009 D Conformity to the CE marking
To Next Page
Loading...
