Mitsubishi MELSEC-A series Programming Manual

6. BASIC INSTRUCTIONS
6 − 53
MELSEC-A
FMOV
Transfers the content of device specified at (S) in blocks to "n" points which begin
with the device specified at (D).
Execution Conditions
Operation Error In the following case, operation error occurs and the error flag turns on.
• The transfer range exceeds the corresponding device range.
Transfer commands
Executed
per scan
Executed
per scan
Executed
only once
Executed
only once
P
OFF
ON

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English