6. NORMAL GAIN ADJUSTMENT
6 - 17
(8) Initializing one-touch tuning
Clicking "Return to initial value" in the one-touch tuning window of MR Configurator2 enables to return
the parameter to the initial value. Refer to table 6.1 for the parameters which you can initialize.
Clicking "Return to value before adjustment" in the one-touch tuning window of MR Configurator2
enables to return the parameter to the value before clicking "Start".
When the initialization of one-touch tuning is completed, the following window will be displayed.
(returning to initial value)
To Next Page
Loading...
