2-30
Seat and seat belts
2
3. Fold up the seatback while pulling the lock release belt on
the rear of the seatback.
4. After returning the seatback, lightly push the seat and
seatback to make sure they are set firmly in place.
Making a flat seat
E00404300279
By removing the head restraints and fully reclining the seat-
backs of the seats, one large flat seat is achieved.
WARNING
!
● Never drive while there are occupants sitting on the
flat seat. This can be extremely dangerous.
CAUTION
!
● To make a flat seat, stop the vehicle in a safe place.
● Make sure the seat is adjusted by an adult or with
adult supervision for correct and safe operation.
● When sliding the seat, be sure not to catch your
hand or leg.
● Do not walk around on top of the seats after they
have been laid flat.
● To ensure the seats are locked securely, attempt to
move them back and forth.
● Do not jump on, or impact the seatbacks heavily.
● To raise the seatback, raise it slowly while support-
ing it with your hands. Never let a child perform this
operation. Doing so could result in an accident.
To Next Page
Loading...
