OTE
● If the lamp flashes unusually quickly, the bulb in a turn-
signal lamp may have burned out. We recommend you to
have the vehicle inspected.
● It is possible to activate the following functions. For fur-
ther information, we recommend you to consult a MIT-
SUBISHI MOTORS Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System (MMCS), screen operations can be used to
make the adjustment. Refer to the separate owner’s man-
ual for details.
• Flashing of the turn-signal lamps when the lever is oper-
ated with the ignition switch in the “ACC” position
• Deactivate the turn-signal lamp 3-flash function for lane
changes
● You can adjust the time required to operate the lever for
the 3-flash function.
For further information, we recommend you to consult a
MITSUBISHI MOTORS Authorised Service Point.
1- Turn-signals
When making a normal turn, use position (1). The lever will
return automatically when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to change a lane, the
side turn-signal lamps and indicator lamp in the instrument
cluster will only flash while the lever is operated.
Also, when you move the lever to (2) slightly then release it,
the side turn-signal lamps and indicator lamp in the instru-
ment cluster will flash three times.
To Next Page
Loading...
