3-66
Instruments and controls
3
Wiper and washer switch
E00507100888
Windscreen wipers
E00516900026
The windscreen wipers can be operated with the ignition
switch in the “ON” or “ACC” position.
If the blades are frozen to the windscreen or rear window, do
not operate the wipers until the ice has melted and the blades
are freed, otherwise the wiper motor may be damaged.
To adjust intermittent intervals
With the lever in the “INT” (speed-sensitive) position, the
intermittent intervals can be adjusted by turning the knob (A).
OTE
● The speed-sensitive-operation function of the windscreen
wipers can be deactivated.
For furher information, we recommend you to consult a
MITSUBISHI MOTORS Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System (MMCS), screen operations can be used to
make the adjustment. Refer to the separate owner’s man-
ual for details.
MIST- Misting function
The wipers will operate once.
OFF- Off
INT- Intermittent (Speed sensitive)
LO- Slow
HI- Fast
1- Fast
2- Slow
To Next Page
Loading...
