Instruments and controls
3-59
3
Lamp monitor buzzer
E00506100243
[When the engine was started using the key]
If the driver’s door is opened when the key is in the “LOCK” or
“ACC” position or removed from the ignition switch while the
lamps are on, a buzzer will sound to remind the driver to turn
off the lamps.
[When the engine was started using the keyless operation func-
tion]
If, while the lamps are illuminated, the ignition switch is set to
the “LOCK” or “ACC” position, or the driver’s door is opened
with the ignition switch set to the “LOCK” position, a buzzer
will sound to remind the driver to turn off the lamps.
In both cases, the buzzer will automatically stop if the auto-cut-
off function is activated.
Dipper (High/Low beam change)
E00506200329
When the lamp switch is in the “ ” position, the beam
changes from high to low (or low to high) each time the lever is
pulled fully (1). While the high beam is on, the high beam indi-
cator lamp in the instrument cluster will also illuminate.
To Next Page
Loading...
