3-58
Instruments and controls
3
Lamps (headlamps, fog lamp, etc.) auto-cutout
function
● If, while the lamp switch is in the “ ” position, the igni-
tion switch is turned to the “LOCK” position or “ACC”
position, or the key is removed from the ignition switch,
the lamps automatically go out when the driver’s door is
opened.
[When the engine was started using the key]
• If the key is removed and the driver’s door is opened, a
buzzer sounds at a high pitch intermittently to remind
the driver to turn off the lamps.
[When the engine was started using the keyless operation
function]
• If the ignition switch is turned to the “LOCK” position
and the driver’s door is opened, a buzzer sounds at a
high pitch intermittently to remind the driver to turn off
the lamps.
● If the ignition switch is turned to the “LOCK” position or
“ACC” position, or the key is removed from the ignition
switch, while the lamp switch is in the “ ” position, the
lamps will remain on for about 3 minutes while the
driver’s door is shut and will then automatically go out.
OTE
● The lamp auto-cutout will not function when the lamp
switch is in the “ ” position.
● The lamp auto-cutout function can also be disabled.
For further information, we recommend you to consult a
MITSUBISHI MOTORS Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System (MMCS), screen operations can be used to
make the adjustment. Refer to the separate owner’s man-
ual for details.
When you want to keep the lamps on:
● Turn the lamp switch in the “OFF” position while the
ignition switch is in the “LOCK” or “ACC” position.
● Turn on the lamps with the switch in the “ ” or “ ”
position again, then the lamps will remain on.
OTE
● When the engine was started using the key, if the driver’s
door is opened and the key is removed, the lamp reminder
buzzer sounds at a high pitch intermittently.
The buzzer stops when the driver’s door is closed (the
warning is also displayed on the multi-information dis-
play).
● When the engine was started using the keyless operation
function, if the driver’s door is opened and the ignition
switch is in the “LOCK” position, the lamp reminder
buzzer sounds at a high pitch intermittently.
The buzzer stops when the driver’s door is closed (the
warning is also displayed on the multi-information dis-
play).