2-50
Seat and seat belts
2
Child restraint system with ISOFIX mountings
The child restraint system is designed only for seats that incor-
porate lower anchorages. Retain the child restraint system
using the lower anchorages.
It is not necessary to retain the child restraint system using the
vehicle’s seatbelts.
To insta ll
1. Remove any foreign material in or around the connectors
and ensure the vehicle seat belt is in its normal storage
position.
2. Insert the child restraint system’s connectors (A) into the
slits (B) in accordance with the instructions provided by
the child restraint system manufacturer.
A: Child restraint system connectors
A: Connector
B: Slit
C: Vehicle seatback
D: Vehicle seat cushion
E: Lower anchorage
To Next Page
Loading...
