Instruments and controls
3-3
3
Daytime dipper button (meter illumination
control)
E00519800013
Each time you press this button, there is a sound and the bright-
ness of the instruments changes.
OTE
● If you press and hold the button for longer than about 1
second, the brightness automatically scrolls through its
different levels, and stops scrolling when you release the
button.
Select your desired level of brightness.
● You can adjust to 8 different levels for when the tail lamps
are illuminated and 8 for when they are not.
● When the lamp switch is in the “AUTO” position, the
meter illumination switches automatically to the adjusted
brightness, depending on the brightness outside the vehi-
cle.
● The brightness level of the instruments is stored when the
ignition switch is turned off.
1- Brightness display
To Next Page
Loading...
