3-48
Instruments and controls
3
Other interrupt displays (when the ignition switch is “ON”)
E00524200015
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further
details.
Screen System operation status Reference
● When “2WD” mode is selected with
the drive mode selector
Refer to “Electronically controlled 4WD
system” on page 4-21.
● When “4WD AUTO” mode is selected
with the drive mode selector
● When “4WD LOCK” mode is selected
with the drive mode selector
● When the active stability control
(ASC) is operating
Refer to “Active stability control (ASC)” on
page 4-36.
To Next Page
Loading...
