Starting and driving
4-23
4
CAUTION
!
● If the selected drive mode indicator is blinking, the
vehicle switches automatically to front-wheel drive
in order to protect the drive-system components,
and drive mode selection is no longer possible with
the drive mode-selector.
“SLOW DOWN” is also displayed in the informa-
tion screen in the multi-information display.
Reduce speed, and if the indicator goes out after
driving a while, resume driving as before. If the indi-
cator continues blinking for more than about 5 min-
utes, have the vehicle inspected at a MITSUBISHI
MOTORS Authorised Service Point.
blink
CAUTION
!
● If the “4WD” and “LOCK” indicators blink alter-
nately and “SERVICE REQUIRED” appears on the
information screen in the multi-information display,
a problem has occurred with the electronically con-
trolled 4WD system and the safety device has acti-
vated. Have an inspection made by a MITSUBISHI
MOTORS Authorised Service Point.
blink
To Next Page
Loading...
